beautypg.com

Spectra v – White’s Electronics Spectra V3 Assembly Guide User Manual

Page 16

background image

6 Spectra Assembly Guide

Press ON/OFF.

Optionally… Press ZOOM to select text size.

Squeeze & release Trigger on the handle grip.

Hold Trigger & hold ENTER, pump search coil (loop) up

and down on the ground until background hum steadies, release

ENTER… and then release Trigger and begin searching.

(Note releasing Trigger before releasing ENTER) locks Spectra

in pinpoint mode, squeeze and release trigger twice to unlock

pinpoint.

Sweep search coil close to the ground, from side to side,

overlapping each pass.

Locate a consistent “BEEP” upon several passes of the

search coil.

Look at display. VDI, Blocks, and ICON, indicate a metal

target worthy of digging.

Pinpoint squeeze & hold toggle on the grip and slowly “X”

the area. Depth in inches and maximum bars indicates target

center.

Spectra V

3

- White’s Spectra Metal Detectors -

Manufactured in

Sweet Home, Oregon USA

First Time Out - ”Turn On And Go” ...

P/N 621-0514

Printed in USA

3/09