White’s Electronics Spectra V3 SpectraSound Wireless Headphone - Manual

Your SpectraSound Wireless headphone
system has been designed from the
ground up with a single purpose -
TO WORK PERFECTLY WITH YOUR
Spectra
®
METAL DETECTOR!
Locate battery door- open by turning counter clockwise to
“Open” position.
Install (2) AA Batteries (provided) Take care to orient batteries
per embossed example- one up- one down.
Replace Battery door- turn clockwise to ”Lock” position.
SpectraSound™ System comes factory pre-connected
(channel 4) allowing the “Quick Connect Sequence”.
( see back page).
SpectraSound
Set Up -
SpectraSound is not an off-the-shelf system adapted for metal detection
use. A single button on the headset turns SpectraSound
ON and OFF .
All other functions are a part of your Spectra Metal Detector.
Dependable - Comfortable - no-delay real-time audio that matches per-
fectly your detectors sweep speed and speaker response.
Part Number 802-5282
FCC# R8KUGWM1USHN33A .
™