White’s Electronics Classic 1 SL - Manual (Page 4)

White’s Pulsescan Field Manual
QUICK START SETTINGS
Easy Ground/No Variable Audio Desired -
For use in ground where the threshold hum remains steady and smooth as the search coil is swept over the
ground with Gnd Bal Toggle off indicating that the Pulsescan TDI can be used without Ground Balance
as the pulse circuit itself can handle the ground without ground balancing. All targets will sound the same
with no Variable Audio (best depth).
Gnd Bal toggle
Ground Balance
Conductivity toggle
Freq Adj
(as needed)
Pulse Delay
Gain
(adjust for stability}
Threshold
Power Toggle
Beach
Hunting
Relic
Hunting
Gold
Prospecting
OFF
12 NOON
10 u S
6
ON
OFF
12 NOON
midway 17.5 u S
6
ON
OFF
12 NOON
25 u S
6
ON
Ground Balance Control is not operative
Conductivity select is not operative
User adjusted to steady hum per manual
Gold Prospecting -
Best sensitivity to small/medium
nuggets and small gold jewelry
Beach Hunting -
Best sensitivity to coins and
larger gold/silver jewelry
Relic Hunting -
Best sensitivity to very large nuggets
and all large metal
Gnd Bal toggle
Ground Balance
Conductivity toggle
Freq Adj
(as needed)
Pulse Delay
Gain
(adjust for stability}
Threshold
Power Toggle
Beach
Hunting
Relic
Hunting
Gold
Prospecting
ON
12 NOON
10 u S
6
ON
ON
12 NOON
midway 17 u S
6
ON
ON
12 NOON
25 u S
6
ON
Setting that produces perfect ground balance
User adjusted per manual under Explanation of Controls
User adjusted to steady hum per manual
Bad Ground/Variable Audio Mandatory -
For use in ground where Ground Balance was able to be achieved with the Gnd Bal Toggle on indicating
that the Pulsescan required the use of the Ground Balance control. All targets will also respond with the
Variable Audio = low/high tone.
Gold Prospecting -
Best sensitivity to small/medium
nuggets and small gold jewelry
Beach Hunting -
Best sensitivity to coins and
larger gold/silver jewelry
Relic Hunting -
Best sensitivity to very large nuggets
and all large metal