beautypg.com

How to adjust handle position and handle tension, Cleaning aerator and debris screen, Contemporary traditional – Waterstone PREP FAUCETS 4900 User Manual

Page 4

background image

HANDLE ON LEFT

HANDLE IN FRONT

HANDLE ON RIGHT

ORIGINAL FACTORY POSITION

MAY HIT BACKSPLASH

NEW ADJUSTED POSITION

CLEARS BACKSPLASH

H

C

A

B

C D

A

B

E

E

G

C D

F

F

HANDLE ON LEFT

HANDLE IN FRONT

HANDLE ON RIGHT

ORIGINAL FACTORY POSITION

MAY HIT BACKSPLASH

NEW ADJUSTED POSITION

CLEARS BACKSPLASH

H

C

A

B

C D

A

B

E

E

G

C D

F

F

1. Unscrew and remove the metal cap (A). Remove Hot and Cold Indicator Ring (B).
2. Unscrew and remove holding screw (C) and washer (D).
3. Hold handle (E) in a vertical position. Pull straight off faucet. Rotate handle
away from backsplash then slide handle back onto valve stem (F).
4. Insert holding screw with washer and tighten. Slide Hot and Cold Indicator
Ring onto handle and thread metal cap back into place.
5. To adjust handle tension, turn ring (G) clockwise to increase or
counterclockwise to decrease handle tension.

1. Place a small standard screwdriver in the slot at the bottom of metal ring that surrounds the
handle caps (A). Gently pry the button from faucet handle (B).
2. Unscrew and remove holding screw (C) and washer (D).
3. Hold the handle (B) in a vertical position. Pull straight off faucet. Rotate handle away from
backsplash then slide handle back onto valve stem (E).
4. Insert holding screw with washer and tighten. Snap handle cap back into place.
5. To adjust handle tension, turn ring (F) clockwise to increase or counterclockwise to decrease
handle tension.

HOW TO ADJUST HANDLE POSITION AND HANDLE TENSION

CONTEMPORARY

TRADITIONAL

1. Gently unscrew and remove spout tip (A) by hand.
2. Remove O-ring (B). To remove aerator (C), push with finger from bottom.
3. Thoroughly rinse aerator with water until all debris is removed.
4. Place aerator, then O-ring back into spout tip.
5. Gently screw spout tip, by hand, snuggly back onto spout.

Depending on quality of your household water, the aerator
and debris screen may become clogged. We recommend
cleaning one week after installation, then a minimum of
once of year thereafter. To remove the debris, follow the
steps below.

CLEANING AERATOR AND DEBRIS SCREEN

B

C

A

1.

2.

3.

4.

5.

On some kitchen countertops, the handle
may hit the backsplash when the faucet
handle is positioned to the left or right
(Fig. 1). Waterstone gives you the option of
adjusting the handle 45 degrees to avoid
hitting backsplash.

FIG.1