Avanti WCR683DZD - Manual (Page 11)

11
Recommended Temperatures for Chilling Wine .
Red Wines
58-65
?
F
Dry/White Wines 48-57
?
F
Rose Wines 49-51
?
F
Sparkling Wines 40-47
?
F
? ON/OFF POWER
To turn ON or OFF the appliance, press the ON/OFF button.
? SETTING THE TEMPERATURE CONTROL
You can press the left side UP and DOWN buttons to control the internal temperature of
the upper zone and press the right side UP and DOWN buttons to control the internal
temperature of the lower zone.
The degrees indicators will appear in the display window marked UPPER ZONE and LOWER ZONE.
The temperature range of UPPER ZONE is 40 ~ 5 5 ºF which is suitable for storing sparkling and
white wines. The temperature range of LOWER ZONE is 55 ~ 65ºF which is suitable for storing white
and red wines.
?
The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button
once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN
button once.
?
When you store mostly red wines, you should store them in the LOWER ZONE, the temperature
which you control by pushing the above UP
and DOWN buttons need to be set at
between 58 to 65
?
F and the LED lamp under “RED” will be lit.
?
When you store mostly white wines, you can store them in the UPPER ZONE or LOWER ZONE.
When you use the LOWER ZONE, the temperature can be set at between 55 to 57
?
F and the
LED lamp under “WHITE” will be lit. When you use the UPPER ZONE, the temperature can be
set at between 48 to 55
?
F and the LED lamp under “WHITE” will be lit.
?
When you store mostly sparkling wines, you should store them in the UPPER ZONE, the
temperature needs to be set at between 40 to 47
?
F and the LED lamp under “SPARKL” will be lit.
?
The temperature inside the unit will appear in red color in the window marked “DISPLAY”.
NOTE:
?
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
?
When you use the wine chiller for the first time or restart the wine chiller after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the activation
time. Once the wine chiller is running for a few hours everything will be back to normal.
The LED readout will show the original temperature set previously (the preset temperature at the
factory for UPPER ZONE is 50ºF and for LOWER ZONE is 60ºF).
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the UP
and DOWN buttons at the same time for 5 seconds . Fahrenheit or Celsius degrees indicator will
appear in green color in the window marked “SCALE”.