VIAIR 200 PSI High-Flow - Manual (Page 5)

200 PSI HIGH-FLOW AIR SOURCE KIT
USER MANUAL
OPERATING INSTRUCTIONS:
1. IMPORTANT: Always operate the compressor BELOW the
MAXIMUM PRESSURE RATING of the compressor.
Please refer to Application & Specifications Sections of
this manual for details.
2. Always observe the MAXIMUM DUTY CYCLE of the
air compressor. Refer to Compressor Applications
and Specifications Section of this manual for details.
Operation exceeding maximum pressure ratings and or
duty cycle will result in damage to air compressor.
3. Your air compressor is equipped with an AUTOMATIC
THERMAL OVERLOAD PROTECTOR. This feature is
designed to protect the air compressor from overheating
causing permanent damage to your air compressor.
The thermal overload protector will automatically cut off
power to your air compressor should the internal operating
temperature of the air compressor rise above safe levels
during excessive use.
4. Should at any time during use, your air compressor
automatically shuts off; do not attempt to restart air
compressor. Turn power switch to the air compressor to
the OFF position. The automatic thermal overload protector
will automatically reset when internal temperature of the
air compressor drops below safe levels. After allowing
air compressor to cool off for about 30 minutes, you can
safely resume use of the air compressor by turning on
the air compressor.
5. To prevent discharge of your vehicle’s battery, we strongly
recommend that you keep the vehicle’s engine running
while using the air compressor. Compressor performance
is enhanced when operating compressor with vehicle’s
engine running.
6. IMPORTANT: ONLY OPERATE THE AIR COMPRESSOR
IN WELL-VENTILATED AREAS.