AT&T E2120 - Manual (Page 17)

15
Clock Radio Operation
To set the clock
You should set the clock so the alarm function can
awaken you at the correct time of day.
Press and hold
SET CLOCK
until the display begins
blinking, then follow the steps at left to set the clock.
While setting the clock, you can press
HOUR
or
MIN
to
advance by 1 digit, or hold down the buttons to
advance more quickly.
1 SET CLOCK
12:00
PM
Press and hold until time blinks.
2 HOUR
1:00
PM
Press to select correct hour (press
and hold to advance quickly)
3 MIN
1:23
PM
Press to select correct minute
(press and hold to advance quickly)
4 SET CLOCK
1:23
PM
Press to set clock to
displayed time.
NOTE: If electrical power is lost for more than 15 minutes, the time
display will change to 12:00 and you will have to reset the clock.
91-000040-010-000_E2120ManualMP_R0Aug0904.qxd 8/9/2004 10:06 AM Page 15