Arcam P1 - Manual (Page 16)

C31/P35/P1
E-16
C31/P35/P1
E-17
E
n
g
li
s
h
Remote-control codes
The following tables give the IR-commands accepted by the C31.
Power commands Menu navigation commands
Command Decimal Code Command Decimal Code
Power toggle 16–12 UP 16–32
Power-on 16–123 DOWN 16–33
Power-off 16–124 SELECT 16–37
ENTER 16–87
Source selection commands
Command Decimal Code Display control commands
PHONO select 16–1
Command Decimal Code
AV select 16–2 Display 16–59
TUNER select 16–3
DVD select 16–4 Volume control commands
TAPE select 16–5
Command Decimal Code
VCR select 16–6 Mute 16–13
CD select 16–7 Volume up 16–16
AUX select 16–8 Volume down 16–17
The following tables give commands accepted by the P35.
Power commands Speaker control commands
Command Decimal Code Command Decimal Code
Power toggle 16–12 Speaker 1 toggle 16–35
Power-on 16–123 Speaker 2 toggle 16–39
Power-off 16–124 Speaker 1 on 16–43
Speaker 1 off 16–44
Speaker 2 on 16–45
Speaker 2 off 16–46
The following table gives commands accepted by the P1.
Power commands
Command Decimal Code
Power toggle 16–12
Power-on 16–123
Power-off 16–124
Note that the C31 also responds to code 20–53 (the PLAY command for an Arcam CD player). The C31
swiches automatically to CD input on receiving this command.