Audiovox Rampage ACC-60 User Manual

Page 12

SET

SETT

TTING THE CLOCK

ING THE CLOCK

1. Switch the vehicle ignition “on” and the radio “on” (radio frequency or disc

track number will be shown on the display panel).

2. Press and hold the time button (T/F) approximately 2 seconds

until the time display appears with AM or PM and the colon ( : ) flashing. Release
the T/F button.

3. Press the Down Tuning button ( ) to adjust the hours and the AM/PM indication,

and the Up Tuning button ( ) to adjust the minutes to the correct time.

4. When the correct time is shown on the display panel, wait 5 seconds for the

display to return to the normal indication.

ERROR CODES

If a problem should develop while operating the CD player, the following error codes
may be displayed on the display panel:

INF-1: Indicates mechanical malfunction. Press the Reset button

INF-2: Indicates mechanical malfunction. Press the Reset button

INF-3: Indicates mechanical malfunction. Press the Reset button

INF-4: Indicates disc focus error. Press the Reset button

INF-5: Indicates disc focus error. Press the Reset button

INF-6: Indicates mechanical malfunction. Press the Reset button

INF-7: Indicates data error. Press the Reset button

INF-8: Indicates disc reading error. Eject the disc, make sure

it is clean, undamaged, and loaded correctly (label side up). Re-load the
disc and check for proper operation or try another disc.

INF-9: Indicates disc lever error. Press eject button.

If the suggested measures do not solve the problem, contact an approved warranty
station near you for further assistance.

SETSETSETSETSET

TTTTT

ING THE CLOCK / ERRING THE CLOCK / ERRING THE CLOCK / ERRING THE CLOCK / ERRING THE CLOCK / ERR

OR CODESOR CODESOR CODESOR CODESOR CODES