Information sheet 963 and tops, Available bacnet properties, Data link layer options – TREND 963 and TOPS User Manual
Page 3: Device address binding, Networking options, Character sets supported
963 and TOPS BACnet PICS TP201011 Issue 2 19/01/2009
3
Information Sheet
963 and TOPS
AVAIlABle BACneT PrOPerTIeS
(Continued)
BACnet Alarms
963 can receive BACnet alarms from BACnet alarm notification classes that TOPS has subscribed to. The BACnet alarms are
converted to Trend alarms by TOPS and passed to 963. Sensor HIGH, sensor LOW, sensor READ, driver SDGT, plot BBUF, digital
input alarms are calculated using the EVENT TYPE property, and the TO Event state according to the table below. Other alarms are
assigned alarm codes by 963 see the 963 Engineering Manual for details.
BACnet Parameters
Trend Alarm
Sensor
Digital Input Driver Plot
HIgH lOW reAD DI=1
DI=0 SDgT BBuf
To Event State
normal
ü
fault
ü
offnormal
ь
ь
ь
high-limit
ü
low-limit
ü
Event Type Property CHANGE_OF_STATE
ь
ь
COMMAND_FAILURE
ü
OUT_OF_RANGE
ь
ь
ь
BUFFER_READY
ü
DATA lInk lAyer OPTIOnS:
BACnet IP, (Annex J)
BACnet IP, (Annex J), Foreign Device
ISO 8802-3, Ethernet (Clause 7)
ANSI/ATA 878.1, 2.5 MB. ARCNET (Clause 8)
ANSI/ATA 878.1, RS-485 ARCNET (Clause 8), baud rate(s):
MS/TP master (Clause 9), baud rate(s):
MS/TP slave (Clause 9), baud rate(s):
Point-To-Point, EIA 232 (Clause 10), baud rate(s):
Point-To-Point, modem, (Clause 10), baud rate(s):
LonTalk, (Clause 11), medium:
Other:
DeVICe ADDreSS BInDIng:
Is static device binding supported? (This is currently necessary for two-way communication with MS/TP slaves and certain other
devices.) Yes No
neTWOrkIng OPTIOnS:
Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.
Annex H, BACnet Tunneling Router over IP
BACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices?
Yes No
CHArACTer SeTS SuPPOrTeD:
Indicating support for multiple character sets does not imply that they can all be supported simultaneously.
ANSI X3.4
IBM
/Microsoft
DBCS
ISO 8859-1
ISO 10646 (UCS-2)
ISO 10646 (UCS-4)
JIS C 6226
If this product is a communication gateway, describe the types of non-BACnet equipment/networks(s) that the gateway
supports:
N/A