TIF MINIMAX-KT Refrigerant Recovery Machine - Manual (Page 12)

SELF PURGING YOUR MINIMAX
PROCEDURE FOR PURGING REMAINING REFRIGERANT FROM THE MINIMAX
1. Close the ports of the system being serviced that
are connected to the input port of the Minimax.
2. Close the input port on the Minimax.
3. Turn off the Minimax.
4. Turn the Recover/Purge valve to the Purge posi-
tion.
5. Restart the Minimax.
6. Run until desired vacuum is achieved.
7. Close the ports on the recovery tank and the
Minimax.
8. Turn the Minimax off.
9. Return the Recover/Purge valve to the Recover
position.
10.Disconnect and store all hoses.
11.Replace the in-line filter on your Minimax after
every job.
SELF PURGE/ AUTO EVACUATE
To change from Recovery mode to Purge follow the steps below:
1. Close the Input port
2. Turn the unit off (to prevent high pressure shutoff).
3. Switch to Purge position.
4. Restart the unit.
12