TIF TT-200 BUTT SET - Manual (Page 3)

1. Receiver
2. Mega Ohm (M ) Meter
3. Company logo
4. TONE/PULSE: On/Off switch for pulse or tone.
5. TEST/CALL: On/Off switch. Off position for M
Ω
insulation meter and
On for subscriber calling with the METER/CALL switch.
6. HOOK: On/Off switch.
7. Microphone
8. SP: Speakerphone switch.
9. MON: On/Off switch for line monitoring without data loss.
10. METER CALL: Button for Insulation Resistance measurement and
subscriber calling.
11. Dial Keypad: The recessed 16-button keypad is housed in the
receiver end of the housing. The recessed design provides physical
protection to the keyboard and prevents accidental button operation.
12. Polarity LED
13. Polarity LED
14. P: Polarity button.
15. Speaker Phone Output
16. Cordset: The cord set with one red and one black conductor. Each
conductor is fitted with an alligator clip, offset 20 degrees, with pierc-
ing pin and angled bed nails cord (ABN). (P/N TT-200-1)
17. Belt clip: A spring-loaded belt clip secures to a belt loop or D-ring.
18. Cord Line Hanger
19. Non-Slip Pad: The form and non-slip pad on back of the handgrip
frees up both hands while the Butt set rest on the shoulder.
20. Battery Cover: Compartment for one 9V battery.
PHYSICAL DESCRIPTION (See Figure 1)
-2-
TT-200 (BS-100) 2/12/01 4:00 PM Page 3