Terk LFIRX_OMЙ - Manual (Page 4)

STEP 2:
Setting Up the Receiver
Where to Use: Use in the room where the AUDIO/VIDEO
equipment’s infrared sensor is located.
How to Install:
1. Plug the Receiver power cord into a standard
electrical outlet.
2. Point the IR logo on the Receiver toward the
AUDIO/VIDEO infrared remote sensor on the
audio/video component.
3. Check to ensure that the Receiver is located within
20 feet of the AUDIO/VIDEO equipment.
After setting up your Transmitter and Receiver,
operate the Signal Sender by aiming your remote
at the IR logo on the front of the Transmitter.
LF-IRX
6
STEP 1:
Setting Up the Transmitter
Where to Use: Set up the Transmitter in the room where
you wish to use your remote control (example: use in the
additional room wired to receive a satellite signal from
your primary receiver).
How to Install:
1. Plug the Transmitter into
a standard electrical outlet.
2. Place the Transmitter on a
level, stable surface, with the
IR logo facing you. In most
cases, the unit can be placed
up to 18 feet from where you
will be using the remote control.
3. Place the Transmitter away
from the AUDIO/VIDEO
equipment and the Receiver
(in another room, for example).
LF-IRX
5
Maximum 18' Maximum 20'
Ma
xim
um 1
00'
Maximum 18' Maximum 20'
Ma
xim
um 1
00'