Terk DTOC User Manual - Manual (Page 8)

7
Mounting the DTOC to a surface
(continued)
D
TOC
6. Tighten all screws. Attach the screw covers.
7. Skip to the "Connecting the DTOC to a TV" section to complete
installation.
5. Position and orient the
antenna.
Loosen the screws between the
arm and the base or antenna
just enough so that you can
position and orient the antenna
the way you want.
You can also adjust the
antenna's orientation on the
antenna itself. On the antenna's
underside, next to the arm,
there are two screws. Loosen
these just enough so that you
can rotate the antenna on the
arm. Once you've found the
orientation you want, tighten
these screws.