Terk DTOC Quick Start Guide - Manual (Page 2)

Connect the antenna to your TV.
See your User Guide for more detailed
information about setup, adjustments,
and troubleshooting.
Questions? Please call our toll-free
help line at 1-800-768-1969
Scan for channels on your TV or
converter box.
Because digital television signals are often
broadcast on a different frequency than the actual
channel number, it’s important to perform a
channel scan to make sure you can tune to all the
channels you receive.
For detailed instructions on performing a channel
scan, see the owners manual that came with your
TV or converter box.
IMPORTANT: Any time you change the antenna’s
position, make sure you re-scan for channels on
your TV or digital TV converter box. The channels
you receive may have changed.
Once you’ve found the
orientation you want,
retighten all screws. Then
attach the screw covers as
shown here.
> Run the provided
coaxial cable from the
antenna towards your
television set.
> Connect the provided
coaxial cable to the
ANT jack on the DTOC
amplifier insert.
> Connect the built-in
coaxial cable on the
amplifier insert to the
antenna input jack on
your TV or converter
box.
> Connect the power
adapter into the
amplifier insert after
all other connections
are made.
> Plug the power
adapter into a
standard AC outlet.
Water Damage Prevention: At the point where your
coaxial cable lead enters the house, you should allow
for some slack in the coaxial cable as a “drip loop.” See
the User Guide for more information.
5
DTOC QSG 00
You can also adjust the
antenna’s orientation on
the antenna itself. On the
antenna’s underside, next
to the arm, there are two
screws. Loosen these just
enough so that you can
rotate the antenna on the
arm.
Make final adjustments and finish
installation.
Loosen the screws
between the arm and
the base or antenna just
enough so that you can
position and orient the
antenna the way you want.
4
TV
DTOC
Provided 100ft.
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
3
The amplifier insert connects
directly to the back of your TV
via the built-in cable connector.
Channel line-ups change from time to time.
For best performance, do a channel scan
periodically to check for updates.