Terk FDTV2A_OMЙ - Manual (Page 6)

FD
TV2A
5
FDTV2A
Built-In
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
TV
Installation
(continued)
1. Make sure your TV is turned
off.
2. Connect the FDTV2A’s built-in
cable to the input jack of the
amplifier.
3. Connect the amplifier’s built-
in cable to the antenna input
on your TV.
4. Plug the power adapter into
the amplifier and into an
electrical outlet.
Important: This power adapter
should be plugged in so that it
stays vertical or lays flat.
5. Run your TV’s tuner/channel
setup to scan for available
broadcast channels.
To connect the FDTV2A with the amplifier directly to
your TV: