Terk TV55 - Manual (Page 15)

13
Mounting the TV55 Antenna
(continued)
4. Determine mast size. The supplied Mast Bracket will fit
a 1 1/4" or 1 1/2" mast. If the mast being used is 1 1/2" in
diameter, the tabs on the Mast Bracket Cover needs
to removed using a pair of pliers.
See Fig 12.
5. Attach the Mast Bracket Cover
to the Mast Bracket Base by inserting at the hinge.
6. Place the Mast Bracket at the desired height on the mast.
7. Close the cover and secure the 2 1/2" bolt with the wing
nut. Do not over tighten. See Fig 13.
8. Skip to the “Connecting the TV55 Antenna to a TV” section to
finish installation.
TV55
Fig 12.
Fig 13.