Telexper IP Box Camera - Manual (Page 3)

2
Notice:
* You can provide power to nCam Series cameras via
Telexper PoE Gigabit Hub or you can connect DC12V
In (pin-3) and GND (pin-4) for power supply (refer to
above pictures).
* Please use the CAT-6/CAT-5e RJ-45 cable to connect
each Telexper camera.
* The effective distance between the PoE Hub and IP
camera is up to 100 meter.
IP CCTV Installation Diagram
Connect the
nCAM using the
CAT-6 RJ-45
cable
Connect DC 12V or AC 24V power
Power Cord
Uplink to
network