Teledyne LeCroy QPHY-10GBase-KR - Manual (Page 5)

QPHY-10GBase-KR Operator’s Manual
Introduction
About QualiPHY
QualiPHY is highly automated compliance test software meant to help you develop and validate
the PHY (physical-electrical) layer of a device, in accordance with the official documents
published by the applicable standards organizations and special interest groups (SIGs). You can
additionally set custom variables and limits to test compliance to internal standards.
QualiPHY is composed of a “framework” application that enables the configuration and control
of separate tests for each standard through a common user interface. Features include:
• Multiple Data Source Capability: Connect to your X-Stream oscilloscope via LAN or
other interfaces.
• User-Defined Test Limits: Parameter interconnect losses can be factored into the
parametric results.
• Flexible Test Results Reporting that includes XML Test Record Generation.
Understand a device performance distribution, or obtain process related information from
the devices under test.
About QPHY-10GBase-KR
QPHY-10GBase-KR is an automated test package performing all the normative, real-time
oscilloscope tests for sources in accordance with Clause 72 of IEEE 802.3ap-2007.
The software can be run on any Teledyne LeCroy oscilloscope with at least 16 GHz bandwidth.
Required Equipment
• Real-time Teledyne LeCroy oscilloscope with oscilloscope with the QualiPHY software
and an activated QPHY-10GBase-KR software option
Note: QPHY-10GBase-KR tests are designed to run on WavePro/SDA/DDA 7Zi/ZI-A,
WaveMaster/SDA/DDA Zi/Zi-A, LabMaster 9Zi/Zi-A Series oscilloscopes with minimum
16 GHz bandwidth.
• SDAII or SDAIII oscilloscope software option. (SDAII / SDIII is standard on SDA model
oscilloscopes)
923664 Rev A 1