Teka HPE 735 User Manual

Page 12

Switch off oven

Conventional

It is used for sponges and cakes where the

heat received must be uniform to achieve a

spongy texture.

Conventional with fan

Appropriate for roasts and cakes. The fan

spreads the heat uniformly inside the oven.

Grill

For preparing dishes with super ficial roasting.

It allows the outer layer to be browned without

af fecting the inside of the food. Ideal for flat

food, such as steaks, ribs, fish, toast.

MaxiGrill

Allows greater sur faces to be prepared, than

with the grill, together with higher power redu-

cing the time required for browning of the food.

MaxiGrill with fan

Allows uniform roasting at the same time as

sur face browning. Ideal for grills. Special for

large volume pieces, such as poultr y, game,

etc. It is recommended to put the item on a

rack with a tray beneath to collect the stock

and juices.

Caution

While using the Grill, MaxiGrill or MaxiGrill with

fan, the door must be kept closed.

Turbo

The fan distributes the heat coming from an

element located at the back of the oven. As a

result of the evenly distributed temperature,

food can be cooked on two levels at the same

time.

Lower Element with Turbo

Ideal for baking pizzas, pies, and fruit tar ts or

sponges.

Lower element

Heats only from beneath. Suitable for heating

dishes and raising pastr y and similar.

Defrosting

This cooking mode is suitable for gently defros-

ting of food. In special food to be consumed

unwarmed, e.g.: cream, custard, pastr y, tar ts,

cakes, fruit, etc.

Pyrolytic Function

This programme allows you to carr y out a

pyrolytic cleaning cycle which involves the oxi-

disation and carbonisation of grease accumu-

lated during cooking, through the high tempe-

ratures that

are

reached inside the

oven.

During the cleaning cycle the light inside the

oven will remain of f.

The light remains on through all cooking func-

tions except the pyrolytic function.

Oven Functions

Use of the Oven

Setting the time on the Electronic Clock

When the oven is connected to the power sup-

ply, the word

and the indication 00:00

flash on the display. Press

to set

the time on the clock. The clock beeps twice

to confirm the selected time.

If you wish to modify the time, press

until the word

and the current time

flash on the screen. Press

. Then press

to modify the time. The clock beeps

twice to confirm the modification.

Manual Operation

The oven is ready to be used when the clock

has been set. Select a cooking function and a

temperature.

When you begin cooking, symbol

lights up

gradually until the oven heats up 100% to the

selected temperature.

Set the controls to

to turn the oven of f.

Symbol

gradually goes out as the tem-

perature inside the oven drops.

Functions of the Electronic Clock

Alarm: Creates an alarm signal when the

period of time finishes; the oven does not

need to be in use in order to use this function.

Cooking Time: To cook for a selected length

of time; the oven turns itself of f automatically

when the time finishes.

End Cooking Time: To cook until a set time;

the oven turns itself of f automatically when

the time finishes.

Cooking time and End Cooking Time: To cook

for a selected length of time and end at a set

time. When this function is set, the oven

comes on automatically at the time required

in order to cook for the set length of time

(Cooking time) and end automatically at the

indicated time (End Cooking Time)

Child Safety Function. This function blocks

the oven to prevent small children from inter-

fering with the controls.

Programming the Pyrolytic function

Programming the Alarm

1 Press

until symbol

lights up. Press

2 Set the period of time after which you wish

the alarm to sound by pressing

3 The clock beeps twice, the current time is

displayed and symbol

lights up per-

manently to indicate that the alarm has

been set.

4 When the set period of time comes to an

end, the alarm sounds and symbol

star ts to flash.

5 Press any button to stop the alarm; symbol

goes out.

You can consult the remaining time at any

moment by pressing

until symbol

flashes and then pressing

. You can

also modify the set time at this point by press-

ing

. The clock beeps twice to con-

firm the change.

If you wish the remaining time to be displayed

until the end of the set period of time, press

until symbol

flashes and then

press

and keep it pressed in. Symbol

flashes and the word

lights up.

Keep

pressed in again to return to the

real time.

Setting the Cooking Time

1 Press

until symbol

lights up.

Press

2 Select the period of time you wish to cook

for by pressing

3 The clock beeps twice, the current time is

displayed and symbol

lights up perma-

nently to indicate that the oven will turn

itself of f automatically.

4 Select a cooking function and temperature.