Teka HE 720 - Manual (Page 9)

17
ENGLISH
16
7 Set the controls to to turn the oven off.
You can consult the end cooking time at any
moment by pressing
or until symbol
flashes and then pressing . You can
also modify the end cooking time at this point
by pressing
or . The clock beeps twice
to confirm the change.
This function can be used even when you are
already using the oven. To do this, follow the
instructions indicated above except point
number 4.
Setting the Cooking Time and the End
Cooking Time
1 Press or until symbol lights
up. Press .
2 Select the period of time you wish to cook
for by pressing
or .
3 The clock beeps twice, the current time is
displayed and symbol
lights up per-
manently.
4 Press or until symbol lights
up. Press .
5 Select the time you wish the cooking
process to finish at by pressing
or .
6 The clock beeps twice, the current time is
displayed and symbol
lights up per-
manently.
7 Select a cooking function and temperature.
8 The oven remains off with symbols
and
lit up. Your oven is set.
9 When the time to star t cooking is reached,
the oven star ts up and cooks for the set
period of time.
10 When the set end cooking time is reached,
the oven turns itself off, the alarm sounds
and
symbols and flash.
11 Press any button to stop the alarm and
turn the oven back on again.
12 Set the controls to to turn the oven off.
You can modify the end cooking time by press-
ing
or until symbol lights up and
then pressing . You can now modify the
end cooking time by pressing or . The
clock beeps twice to confirm the change.
Important
In the event of a power cut, all the electronic
clock settings are deleted and the indication
00:00 flashes on the display. It is necessar y
to set the time and programme the clock
again.
Changing the oven light bulb
ATTENTION
Make sure the oven is unplugged before
changing the bulb.
• Detach the chrome suppor ts by loosening
the screw (A).
• Release the bulb-holder glass cover with a
tool.
• Change the bulb.
• Reassemble the glass cover and ensure
that ever ything fits in the correct position.
The replacement bulb must be resistant to
temperatures up to 300 ºC. You can order one
from Technical Ser vice.
A