Installation instructions – Teka MWE 205 FI User Manual
Page 3

380+2
340
2
Please note
Electrical connection
The oven is fitted with a plug and must only be connected to a properly installed earthed
socket. The socket must only be installed and the connecting cable must only be
replaced by a qualified electrician, and in accordance with the appropriate regulations.
If the plug is no longer accessible following installation, an allĆpole isolating switch must
be present on the installation side with a contact gap of at least 3 mm.
The builtĆin cabinet shall not have a rear wall behind the appliance.
Minimum installation height 85 cm.
Do not cover ventilation slots and air intake points.
Note:
Do not trap or kink the mains lead.
Installation Instructions
Please Read the Manual Carefully Before Installation