Teka NFT 340 - Manual (Page 5)

3
English
Description of the functions of refrigerator and freezer
Key:
A1: Stand-by
A2: Set push button (Functions Menu)
A3: Temperature increase push button
A4: Temperature reduction push button
A5: OK push button - confirms set values
A6: ON/OFF switch
B: Super Cool indicator light
C: Holiday function indicator light
D: Refrigerator temperature
E: Refrigerator compartment indicator light
F: Cooler indicator light
G: Alarm indicator light
H: Freezer temperature
I: Super Freeze indicator light
Stand-by
Super Cool
Super Freeze
Ice Maker
Clean Pipe
Input water time
Holiday Alarm
Set OK
A1
B D F E G H I C
A2 A3 A4 A5 A6
Initial power supply
When the refrigerator is powered for the first time, indicator
(G) lights up. The temperature of the refrigerator and freezer
compartments is respectively shown as “-“and “- -“on the display,
due to the high temperature inside. An alarm buzzer is then
generated. If you press key (A5) the buzzer stops, whereas the
indicator (G) stays lighted until the temperatures predefined in
the factory are reached. The display reduces its brightness one
minute before the end of the last operation.
Setting the temperature in the Refrigerator compartment
Press key (A2) repeatedly until indicators (D) and (E) begin to
flash simultaneously; press keys (A3) and (A4)
to set the temperature from a minimum value of 2°C up to a
maximum of 8°C.
Press push button (A5) to confirm the set temperature:
indicators (D) And (E) will stop flashing.
Setting the temperature in the Cooler compartment
Press key (A2) repeatedly until indicators (H) and (F) begin to
flash simultaneously; press keys (A3) and (A4)
to set the temperature from a minimum value of -24°C up to a
maximum of -16°C.
Press push button (A5) to confirm the set temperature:
indicators (H) and (F) will stop flashing
Super Cool
Press key (A2) repeatedly until indicator (B) begins to flash;
press push button (A5) to confirm activation of the Super Cool
function.
Indicator (B) will stop flashing and will remain lighted. This
function will be automatically disabled when temperature
drops below minimum level. This function can be disabled by
repeating the activation procedure
In this mode, the temperature in the refrigerator compartment
and the Holiday function cannot be set.
Super Freeze
Press push button (A2) repeatedly until indicator (I) begins to
flash; press push button (A5) to confirm activation of the Super-
Freeze function.
Indicator (I) will stop flashing and will remain lighted. This
function will be automatically disabled within 72 hours.
This function can be disabled by repeating the activation
sequence.
In this mode, the temperature in the cooler compartment
cannot be set.
Holiday function
Repeatedly press push button (A2) until indicator (I) begins to
flash; press push button (A5) to confirm activation of the Holiday
function. Indicator (C) stops flashing and remains lighted. In
Holiday mode the refrigerator operates at a temperature of
over +10°C (we advise you to remove perishable foods from the
refrigerator compartment and close its door after activating this
function). The temperature of the refrigerator compartment is
indicated with “-”. To disable the function, repeat the activation
procedure.
In this mode you can set both the Super Freeze function and
the Super Cool function. In the latter case, the Holiday function
is automatically disabled.
Display Control
The display screen automatically reduces brightness one
minute after the end of the operation. Brightness is resumed by
opening the door or pressing any key. In the case of an alarm,
only the buzzer is activated, and the brightness of the display
is not modified.
Open door alarm
When the refrigerator door stays open for more than 3 min.,
indicator (G) flashes and a buzzer is sounded: 3 beeps every 30
seconds. If the door is closed, the alarm stops and indicator (G)
goes OFF. To exclude the buzzer only, press push button (A5).