Teka TKI2 300 - Manual (Page 14)

EN
13
The operating temperature is regulated
by the temperature control.
Warm Cold
1 = Lowest cooling setting
(Warmest setting)
5 = Highest cooling setting
(Coldest setting)
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according
to the desired temperature.
You can stop operation of your device
by pressing on/off Button (1).
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also depends
on ambient temperature, the frequency
with which the door is opened and the
amount of foods kept inside.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.
LED indicators and control
panel
LED indicators in the front section of
your refrigerator are intended to help
you in monitoring the operation of your
appliance.
Keep your food in the refrigerator in a safe
manner by monitoring and using these
LEDs and controls as explained below:
Quick Cool Button (6): Used to cool
the food quickly. Compressor may not
operate immediately but after some time
when the button is pressed and this is
quite normal.
Thermostat Setting Button (2): Used
to set your refrigerator between minimum
and maximum values.
Temperature Indicator (4): Displays
the set temperature of your refrigerator.
Snow LED (5): Lights up when the quick
cool button on the LED panel is pressed.
In this case, your refrigerator operates
continuously.
Press the button again when the food
you would like to quick cool comes to the
desired temperature and the snow LED
will turn off.
Alarm LED (3): It warns you by blinking.
When your refrigerator starts to operate,
if not enough cooling effect is obtained,
when the door of your refrigerator remains
open for a long time and when excessive
food is loaded.
Setting the operating
temperature
1 2 3 5 6 4
5
Using your refrigerator