Teka DW7 86 S - Manual (Page 6)

20
CANCELLING THE CURRENT PROGRAM
To annul the current program, press the START/PAUSE button (4) for a
few seconds, until the PROGRAM STARTED light (5) stops flashing.
Now press the START/PAUSE button (4) again until "P0" appears on the
display (about 10 seconds).
CHANGING THE PROGRAM
To modify the program keep the START/PAUSE button (4) pressed for a
few seconds, until the PROGRAM STARTED indicator light (5) stops
flashing, then select the new program following the instructions provided
above; press the START/PAUSE button (4) again and keep it pressed
for a few seconds, until the indicator light (5) starts to flash again.
HALF LOAD WASH SETTING
(available in all programs except the soak program)
This function is ideal for small loads and saves
water and electricity. It is controlled by the HALF
LOAD button (10) and allows washing in the upper
basket only.
IMPORTANT: at the end of the program remember
to deactivate the function to ensure the next
wash is not also carried out in half load mode by
mistake.
A cutlery basket can be placed in the upper basket, while the lower
basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the
lower basket, since the jet of water will only reach the upper basket.
User instructions