Teka DW8 60 FI - Manual (Page 14)

User instructions
14
SPREAD HALF LOAD
(available in all programs except the soak program)
When there are not many dishes to be watched, the “spread half load”
option, controlled by button (10) is useful; it saves water and electricity
and reduces the program’s duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load..
EXTRA OPTIONS - “3/1” BUTTON
(available in all programs except the soak program)
Press buttons 6 + 8 (EXTRA PROGRAMS button + HYGIENE option
button) simultaneously to activate the "3/1" option; the respective light
(12) comes on to confirm the selection. The option is optimised for use of
detergents which are complete with salt and rinse aid, known on the
market as "3 in 1", "triple action", etc. With this option activated, any salt
and rinse aid If you wish to use detergents which already contain salt
and rinse aid already in the dishwasher will not be used.
N.B.: even with the "3/1" option selected, the regenerating salt/rinse aid
lights will still stay on if their containers are empty.
IMPORTANT: the option continues to be active until it is deactivated by
pressing buttons 6 + 8 simultaneously; the light (12) will then go out.
•
3/1 products are not suitable for use with excessively hard water.
Therefore, if the water hardness is set higher than H3, the 3/1
OPTION light (12) flashes to indicate a setting error. This does not
prevent the use of the option, but the washing results might not be of
the best.