Teka LP7 740 - Manual (Page 3)

User instructions
21
SETTING THE WASHING PROGRAM
To select the most suitable washing program, refer to the table below
which indicates the recommended washing according to dish type and
the degree of soiling.
After using the table to identify the most appropriate washing program,
turn the PROGRAM SELECTION knob (1) to set the program of choice
by aligning the pointer with the program number. If the appliance is fitted
with the selected program indicator disc, this will show the number of the
program set.
AMOUNT OF
DETERGENT
DURATION CONSUMPTION SWITCH,
CYCLE AND
BUTTON
TYPE AND
DEGREE
OF DIRT
ON DISHES
PROGRAM
SEQUENCE
GRAMS MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
SOAK
1
_
Pans and dishes
pending
completion
of the load
Cold prewash
_
6' 4 0,01
NORMAL
65°C
2
_
Pans and dishes
with normal dirt
Cold prewash
Wash at 65°C
2 cold rinses
Rinse at 65°C
Dry
30 130' 24 1,65
INTENSIVE
65°C
3
_
Very dirty pans
and dishes, even
with dried-on dirt
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 65°C
Dry
30 180' 21 1,62
DAILY
65°C
4
_
Dishes
with normal dirt
Wash at 65°C
Cold rinse
Rinse at 65°C
Dry
30 170' 16 1,60
ECONOMY
55°C
(*) EN 50242
4
ECO
Dishes
with light dirt
Wash at 55°C
Cold rinse
Rinse at 65°C
Dry
30 160' 17 1,05
RINSE
5
_
Dishes for rinsing
and drying
Cold rinse
Rinse at 65°C
Dry
_
70’ 11 0,90
Only run the soak program with half loads.
(*) Reference program as per EN 50242 standard.
(–) Not present.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.