Staub Electronics ES-300-SNDBAR-40-BLK EPISODE - 300 SERIES 40IN 3 CHANNEL SOUNDBAR W_3IN WOOFER User Manual
Page 2
pg.2
ES-300-SNDBAR Installation and Users Manual
OVERVIEW
Welcome to Episode® Speakers. We appreciate your purchase and are committed to
providing the highest-quality products possible.
The Episode® Soundbar models are a superb choice for almost every type of home theater or
home audio installation. They have been designed with advanced technological components
that allow for high performance and a lifetime of enjoyment.
IMPORTANT INSTRUCTIONS AND CONSIDERATIONS
Read and understand all instructions.
Before beginning installation, carefully plan location accounting for potential electrical,
plumbing or other obstacles.
RECOMMENDED AMPLIFIER POWER
To get the best performance from the ES-300-SNDBAR, an amplifier or receiver with the
following power rating is recommended:
ES-300-SNDBAR-30 ─ between 20 and 80 Watts RMS per channel
ES-300-SNDBAR-40 ─ between 20 and 90 Watts RMS per channel
SPEAKER WIRE
To connect the ES-300-SNDBAR-30 or ES-300-SNDBAR-40 speaker to your amplifier, high-
quality 14 to 16 gauge stranded speaker wire is recommended. The wire may be connected
directly to the speaker’s binding posts. Remember that you will need 3 runs of speaker wire to
the Soundbar location as it contains the left, center, and right speaker.
Features
• Replaces Left, Center, and Right channels in one convenient speaker
• Low-Profile, Extruded Aluminum Cabinet
• Knockout for Hidden IR Receiver
• Flexible Mounting Options
–Cabinet Top or Shelf Placement with included kickstands
–On-Wall with included mounting plate
–Flat-Screen with optional accessory that attaches to TV mount
What’s Included
(1) ES300-SNDBAR-30 or ES300-SNDBAR-40
(2) Kickstands for Cabinet placement
(2) Shoulder bolts for Kickstand and Wall Plates
(2) Large Flat Washers for Kickstands
(4) Rubber Feet
(1) Wall Plate Bracket
(4) Wood Screws for Wall Plate
(4) Small Flat Washers for Wall Plate
(1) IR Receiver Spacer