LevelOne KVM-0831 - Manual (Page 28)

23
TIME SETTINGS
When the Auto-Scan function is activated, the KVM switch will auto-scan the host ports one
by one in the interval as setting. Notice that the port without connecting to a
computer/server will be skipped over on the scan. The interval range is 5 ~ 99 seconds,
and the default interval is 10 seconds. Press “Enter” key to save the SCAN TIME setting.
OSD MOUSE
You can change the moving speed of mouse cursor in this item. There are three levels to
choose from. The fastest moving speed is “FAST”, the second is “MIDDLE” and the slowest
is “SLOW”.
Using " " and " " key on keyboard to move highlight bar to the wished speed. Press the
Enter key to go into effect.