LevelOne KVM-0412 - Manual (Page 7)

4
4. Power up the connected computers one by one. After your computers are powered up,
the keyboard and mouse will be recognized and now you can begin operating the KVM
switch.
2.2 Easy Operation
There are two methods to control the KVM Switch for PC switching: using the Face-Panel
Push Buttons or Hotkey Commands. For audio/MIC switching, use the hotkey command.
Face-Panel Buttons
The Face-Panel Buttons allow a direct control over PC port switching; simply press the
button to switch PC port. By default, PC port switching and Audio/MIC switching are bound
together (both will be switched simultaneously).
If you want to disable the binding of PC and audio/MIC port switching, use the hotkey
sequence, Scroll Lock + Scroll Lock + W. To enable the binding again, just hit Scroll
Lock + Scroll Lock + Q.
Keyboard hotkey
A keyboard hotkey sequence consists of at least three specific keystrokes:
Hotkey Commands = [Scroll Lock]
*
+ [Scroll Lock]
*
+ Command key(s)