LevelOne KVM-0410 - Manual (Page 5)

LevelOne
7
Figure 6: Computer USB Port Connection
Initial Power-Up
You must power up the Master KVM switch that has a PS/2
keyboard, mouse and monitor connected to it before turning on
any other devices.
! For single KVM Switch:
1) Apply a power adapter (O/P = 9V DC) to the Master.
2) Turn on computers.
! For cascaded KVM Switches:
1) Apply a power adapter (O/P = 9V DC) to the Master.
2) Apply power adapters to all Slaves.
3) Turn on computers.
Note: You may hot plug additional powered-down computers or a
slave Switches without turning any existing KVM switch or computer
off after initial power up.
LevelOne
8