LevelOne KVM-0411 - Manual (Page 8)

5
* User-definable = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK
Hotkey preceding sequence configuration: For users who want to use a preceding
sequence other than two consecutive Scroll Locks, there are convenient ways to configure
it:
1. Hit Scroll Lock + Scroll Lock + H, then the KVM switch will be ready for new preceding
sequence selection. Or Press and hold down the last front-panel button (Button 2 or
Button 4) for over 8 seconds, and then release the button.
2. Select and press the key you would like to use as your preceding sequence (Scroll
Lock, Caps, ESC, F12 or Num Lock keys are available for selection). Now you can use
the new preceding sequence to execute your hotkey commands.
Each keystroke within a hotkey sequence should be pressed within 2 seconds.
Otherwise, the hotkey sequence will not be validated.
Scroll
Lock
Scroll
Lock
Please enter the
Hotkey sequence in 2
seconds H