LevelOne VDS-0120 - Manual (Page 5)

5
5. LED Indicators
On the front panel of VDS-0120, there are four LED indicators as the following
VDS-0120 Front Panel
VDS-0120 Rear Panel
POWER : “ Green On ” indicates power is on and normal.
LAN : “ Green On ” indicates Ethernet LAN port is in connection.
“ Flashing ” indicates Ethernet LAN data activities.
DSL : “ Green On ” indicates VDSL2 is in connection.
“
Flashing
” indicates VDSL2 is in line handshaking.
M/S : “ Green On ” indicates VDS-0120 is set as Slave (VTU-R) mode.
“OFF” indicates VDS-0120 is set as Master (VTU-C) mode.
PSE : “ Green On ” indicates VDS-0120 is providing power over Ethernet.
“OFF” indicates the Power Sourcing Equipment is OFF.
6. Dip Switches Settings
Pin 1 Pin 2 Pin 3 Pin 4
VTU-C/R Mode Rate Limit SNR
OFF VTU-C Interleaved 50/20 Mbps 9dB
ON VTU-R Fast Full Rate 6dB