Acura 2009 RL - Manual (Page 330)

Push the ACC button on the
steering wheel. The ACC indicator
on the instrument panel comes on,
and ‘‘ACC’’ is shown on the multi-
information display.
Accelerate to the desired speed
above 25 mph (40 km/h).
Press and release the SET/
DECEL button on the steering
wheel, then release the
accelerator pedal.
If you press the SET/DECEL button
when the vehicle speed is below 25
mph (40 km/h), you will hear a beep
about 1 second. This means ACC is
not activated, and you cannot set
your speed.
When your speed reaches 25 mph
(40 km/h), ACC goes into wait mode,
and ‘‘ACC’’ is shown on the multi-
information display. 1.
2.
3.
Using the ACC
Adaptive Cruise Control (ACC)
324
ACC BUTTON
SET/DECEL BUTTON