LevelOne IES-0500 - Manual (Page 6)

IES-0500 User Manual Page 6
Front Panel Display
•
Power Status (PWR)
This LED comes on when the switch is properly connected to power and turned on.
‚
Port Status LEDs
The LEDs display status for each respective port.
LED State Indication
10/100TX or 100FX
LNK/ACT
(Green)
Steady
A valid network connection established.
LNK stands for LINK.
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
100
(Yellow)
Steady
Light solid yellow for a port transferring at
100Mbps.
Off
The port is transferring at 10Mbps If this LED is
dark.
Physical Ports
This switch provides:
Five 10/100Base-TX ports
Four 10/100Base-TX ports + one 100Base-FX port
One 10/100Base-TX port + one 100Base-FX port
Connectivity
RJ-45 connectors
SC or ST connector on 100Base-FX fiber port