LevelOne GES-2450 - Manual (Page 77)

Web Smart Switch
77
The following table describes the labels in this screen.
LABEL DESCRIPTION
Port Select the number of the port for which you want to assign IEEE 802.1p
priority to incoming frames.
Queue ID Select the Queue ID for configuration it’s weighted. The Queue ID range
is 1 to 8.
Weight Configure the queue scheduling weight of specified ports. Range is valid
as following:
 0: mean the queue is strict mode.
 1~127: mean the queue weight of the scheduling.
Apply Click Apply to save your changes to the switch.
Weight This field displays the weight of the queue.
3.6.7 Queue Remarking Status
Click QoS > Queue Remarking Status to display the screen as shown next.