LevelOne USB-0502 - Manual (Page 10)

2. Installation
7
Hardware installation
1. Connect the USB end on HUB with Gigabit Ethernet adapters to a free USB port of
your computer. Then a pop-up message will appear in the notification area indicating
the installation is complete.
* Actual strings depend on your operation system. These screen shots are from Windows 7
and might vary slightly for each operation system.
2. Connect an Ethernet cable to the Ethernet port on the adapter.
3. Connect the other end of the Ethernet cable to your network hub, switch or router.
4. Connect your USB devices to the USB ports on the HUB with Gigabit Ethernet Adapter ,
if your USB device, such as a printer or optical drive, etc., came with its own AC
adaptor, make sure that it is plugged into the device and a working electrical outlet.