LevelOne WNC-0305USB - Manual (Page 4)

Chapter 2
Initial Installation
This Chapter covers the software installation of the Wireless USB
Adapter.
Requirements
• Windows 2000 or XP.
• Available USB port.
• CD-ROM
drive.
• IEEE802.11b or IEEE802.11g wireless LAN.
Procedure
You should install the supplied software BEFORE inserting the USB Adapter.
1. Insert the setup CD into the CD-ROM drive on your PC/Notebook.
2. The autorun program should start automatically. If it does not, run the SETUP.EXE
program.
3. Select the desired installation language on the screen.
Figure 1: Start Installation
4. On the screen above, click "Next" to start the installation.
5. Step though the procedure until you see the screen below.