LevelOne FNC-0107TX - Manual (Page 6)

6
Installation
Hardware Installation
To insert the FNC-0107TX into your computer, follow the steps
list below.
1. Turn off the computer and remove its cover.
2. Insert the adapter into a PCI slot.
3. Secure the adapter to the rear of the computer chassis and
put back the computer cover.
4. Connect the adapter to the network using twisted-pair
cables.
Hardware Requirement for Wake-On-LAN

The motherboard must support PCI 2.2. (The function will be
provided from the PCI bus directly ), Some computers may
require you to change a
setting in your computer’s BIOS or
setup program to enable the WOL feature

ATX 2.01 power supply
Install only one active WOL adapter per computer.
You can install additional non-WOL adapters.