LevelOne WGR-6013 - Manual (Page 31)

31
WISP: Wireless ISP(Client + Router)
In this mode, the AP can also send wireless signal to the LAN side. That means the AP can
connect with the remote WISP AP and the indoor wireless card, and then provide IP sharing
capability all at the same time!
First, Select WISP WAN Type and please follow Dynamic IP, Static IP and PPPoE to configure.
Regarding with Wireless setting, like SSID,MAC Channel, Security and Scaned AP ’S MAC.
Please refer to “ 2.3.1.3 Wireless Setting ”