LevelOne WGR-6012 - Manual (Page 55)

55
3.3.4.2 System Log
This page support two methods to export system logs to specific destination by means of syslog(UDP) and
SMTP(TCP). The items you have to setup including:
IP Address for Syslog
Host IP of destination where syslogs will be sent to.
Check Enable to enable this function.
E-mail Alert Enable
Check if you want to enable Email alert (send syslog via email).
SMTP Server IP and Port
Input the SMTP server IP and port, which are concerted with ':'. If you do not specify port number, the default
value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
Send E-mail alert to
The recipients who will receive these logs. You can assign more than 1 recipient, using ';' or ',' to separate
these email addresses.