LevelOne WCS-6050 - Manual (Page 44)

Network Camera User’s Manual
44/54
Syslog
The Network camera supports log the system messages on remote server.
The protocol is compliant to RFC 3164. If you have external Linux server with sys
log service, use “-r” option to turn on the facility for receiving log from remote
machine. Or you can use some software on Windows that is compliant to RFC
3164. An example is Kiwi Syslog Daemon. Visit
http://www.kiwisyslog.com/kiwi-syslog-daemon-overview/.
Check Setup and Enable then input the IP address and port number of the log
server to enable the remote log facility.
In the Current log, it displays the current system log file. The content of the log
provides useful information about configuration and connection after system
boot-up. Click on Finish to save modify settings.