LevelOne FCS-4101 - Manual (Page 48)

Network Camera User’s Manual
48/56
Maintenance
1. “Reboot system”
The “Reboot” button will reboot the Network Camera. It’s useful
while the Network Camera got problem.
2. “Restore system” Click on ―Restore‖ button on the configuration page to restore
the factory default settings. Restore all settings to factory default except settings in
―Network type ‖ and ―Root Password‖. The system will restart and require the installer
program to set up the network again.
3. “Calibrate”
Recalibrate the home position to the default center to recover the
tolerance cased by some external forces. Please note that there is no confirming
message box after clicking on the
“Calibrate” button, the Network Camera will calibrate
immediately.
4. “Export/Import file”
--
Export setting backup file: Click to export all parameters for the device and
user-defined scripts.
-- Upload setting backup file: Click Browse… to upload a setting backup file. Please note
that the model and firmware version of the device should be the same as the setting
backup file. If you have set up a fixed IP or other special settings for your device, it is not