LevelOne FCS-3091 - Manual (Page 28)

FCS-3091 User’s Manual
27
27
Infrared (IR) Cut Filter: The default is automatically switched according to light intensity. Enable indicate
the filter is enable to cut IR light to make sure the color is correct, Disable indicate the filter is disable
and allow the infrared (such as IR LED illuminator) to enter the camera to execute low lux surveillance
application,
Day / Night Threshold: The threshold to change Day or Night mode, default is 20 lux, it indicate that
when the lux is lower than 20 lux, the camera will automatically change to night mode and allow
Infrared to enter the camera.
Color/Mono Mode: The default is automatically switched according to light intensity. It can also be
forced to display color image even in a low light environment.
Camera Mount: Choose camera mounting type; Wall, Ceiling and Table.
Wall Mount: Choose Wall mount type, Go back to Live view, there are 4 kinds of video layout to choose
including Original view, Broad view, Quad with source view and Triple view.
1. Original view:
2. Broad view: