Fs-5000 flat screen speaker system, Specifications, Mounting options – Atlantic Technology FS-5000 User Manual
Page 2

©2006 Atlantic Technology
•
343 Vanderbilt Ave.
Norwood, MA 02062
•
781.762.6300
www.atlantictechnology.com
10.06
Atlantic Technology is a registered trademark of Atlantic Technology
International. Specifications subject to change without notice.
Notice that the FS-5000’s tweeters
are offset above the centerline of the
woofers. This is a perfect example
of the way that Atlantic pays close
attention to acoustic details. By moving
the tweeters up, we significantly
reduce the audibly-intrusive
interference patterns that result from
woofers and tweeters being mounted
side-by-side.
1. “Straight Ahead” wall bracket holds the speaker
½” off the wall pointing straight ahead.
Specifications
FS-5000
Type
Two-way, sealed box
Drivers Woofer (6) 4½” (115mm) GLH
§
Tweeter (3) 1” (25mm) soft dome
Frequency Response
70Hz – 20kHz ±3dB
Nominal Impedance
8 Ohms
Crossover Frequency
3.75kHz, 3rd order
Sensitivity
89dB
Recommended Power
10 – 150 Watts RMS per channel
Magnetic Shielding
Yes
Dimensions w/grille
50 x 6.5 x 5”*
(W x H x D)
1270 x 165 x 127mm
Weight
37lbs; 16.8kg
§
Graphite Loaded Homopolymer
*Height without base. Add 1” height for base.
2. “Angled” wall bracket—angles the
speaker up or down, depending on
whether it’s mounted above or below
the video display.
3. Keyhole mount (on the rear
of the speaker), for simple
flush wall mounting.
4. Using Atlantic’s exclusive center channel rocker base, the FS-5000 can
be used as a freestanding speaker on a TV or on a shelf.
Gloss Black Finish
Mounting Options
Four mounting options, included with speakers:
FS-5000 Flat Screen Speaker System