Configuring usb adapter as a wireless client – Airlink AWLL3025 User Manual

Page 9

Text mode
Original mode

3. Configuring USB Adapter as a Wireless Client

The USB adapter can be set to either Station or Access Point Mode from the Mode
drop-down menu. Station mode is the default selection and should be selected if you
want to connect to a wireless router/access point or conduct peer-to-peer networking.

To open the utility, go to Start, (All) Programs, IEEE 802.11g USB Wireless LAN
Adapter, IEEE 802.11g USB Wireless LAN Utility.

Note to Windows XP Users:

If you encounter the Wireless Zero Configuration dialog box, click Yes to enable the
Wireless LAN Utility to configure your USB adapter.