Connecting speakers – Inter-M DPA-430H User Manual
Page 11
MULTI CHANNEL POWER AMPLIFIER
9
DPA-430H
Connecting Speakers
Connecting Speakers
Before connecting speakers, disconnect the AC power cable. Note the proper connecting terminals as below.
Make sure that the total impedance is not less than the rated impedance indicated.
Only connect speakers with an impedance equal to or greater than those specified below.
NOTE : 1. Connecting speakers with smaller impedance than specified could damage the unit.
2. Do NOT connect low impedance speakers such as 4Ω, 8Ω etc to these speaker terminals, it could
causes damage to the unit.
3. Do not connect outputs of two or more channels in parallel.
4. Keep the output cable away from the input cable.
10W
10W
....
10W
10W
HIGH IMPEDANCE SPEAKER INSTALLATION
Country
Speaker Output
Speaker Impedance (CH1~CH4)
Europe
100V
33.3Ω
USA /Canada
70V
16.3Ω
- ARM-911 (32 pages)
- RM-911D (27 pages)
- RM-8000 (20 pages)
- PX-6216 (19 pages)
- PO-6106 (16 pages)
- PX-8000 (28 pages)
- PM-6228 (12 pages)
- LM-8000 (20 pages)
- RME-6108 (16 pages)
- PP-6213 (15 pages)
- PAC-5000 (50 pages)
- RM-6024 (20 pages)
- ECS-6216S (14 pages)
- ECS-6216P (16 pages)
- PC-6335 (24 pages)
- ITX-102 (16 pages)
- OPT-100D (15 pages)
- R-150PLUS (18 pages)
- A-60 (15 pages)
- PMU-60N (28 pages)
- MA-206U (20 pages)
- PA-6348 (16 pages)
- DPA-300SO (20 pages)
- PA-1000BR (20 pages)
- DPA-4300M (24 pages)
- DPA-130DC (20 pages)
- DPA-430L (20 pages)
- DPA-300DO (20 pages)
- DSA-100DV (20 pages)
- PA-6000A (16 pages)
- QD-4480 (26 pages)
- DPA-300T (20 pages)
- R300PLUS (18 pages)
- PMU-600N (35 pages)
- V2-5000 (20 pages)
- MA-106 (16 pages)
- PA-935N (16 pages)
- PAM-120A (20 pages)
- L-1400 (67 pages)
- OT-4240 (12 pages)
- PAM-510 (19 pages)
- PA-2312 (15 pages)
- MA-106A (16 pages)
- DPA-300TO (20 pages)