Inter-M R500PLUS - Manual (Page 9)

7 R150 PLUS/300 PLUS/500 PLUS
REFERENCE AMPLIFIER
Mounting in a Rack Mounting in a Rack
If multiple high-power amplifiers are mounted in a rack with poor ventilation, the heat from the amplifiers will
cause the interior of the rack (and the amplifiers) to become very hot, which may cause problems with amplifier
performance. If amplifiers are mounted in a rack without an open rear, you should use special care to help
ensure proper ventilation of the rack.
Here are suggestions to help keep the amplifiers properly ventilated:
1. Leave a space of at least 10 cm (4 inches) between the rear door of the rack and the rear panel of the amplifier.
2. Install a fan or blower in the rack to help cool the equipment.
3. Install blank (or vent) panels between amplifiers.
Typical Rack with multiple amplifiers
www.inter-m.com
AMP MODE
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
AVIS
S N
~ AC INPUT: 230V 50Hz,480W FUSE: T5AL/250V
TO REDUCE THE RISK
OF ELECTRIC SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION TO REDUCE THE RISK OF FIRE REPLACE ONLY WITH SAME TYPE FUSE. UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE.
CHANNEL 1
INPUT
BALANCED 0dBm
CHANNEL 2
BALANCED 0dBm
INPUT OUTPUT CHANNEL 1 CHANNEL 2
(4 ~ 8 ) (4 ~ 8 )
(4 ~ 8 ) (4 ~ 8 ) BRIDGED STEREO
REFERENCE AMPLIFIER
OC03 OC03
RATED OUTPUT 250W/CH @4 Ω STEREO RATED OUTPUT 500W @8 Ω BRIDGED MONO
BRIDGED MONO (8 ~16 )
MODEL NO. R500 PLUS
AUTO BLOWER PF-9302
MANUAL OFF AUTO
POWER LED
Auto Blower(PF-9302)
R150 PLUS/300 PLUS/500 PLUS
R150 PLUS/300 PLUS/500 PLUS
R150 PLUS/300 PLUS/500 PLUS
Blank Panel
Blank Panel