Inter-M RM-911D - Manual (Page 13)

10 RM-911D/W(REMOTE MICROPHONE)
3 3 . AUDIO OUTpUT vOlUME
The audio output volume is increased by turning
the volume clockwise.
The audio output volume is decreased by turning
the volume counter-clockwise.
4 4 . MONITOR OUTpUT vOlUME
The monitor output volume is increased by turning
the volume clockwise.
The monitor output volume is decreased by
turning the volume counter-clockwise.
5 5 . Mode Setting Switch
SW1 : Set to On position.
4-Tone chime is output when Talk button is
pressed.
SW2 : Set to On position.
4-Tone chime is output when Talk button is
turned to Off.
SW3 : Set to OFF position.
Voice broadcasting can be done using the
MIC during the Talk button is pressed.
SW3 : Set the to ON position.
When the Talk button is once pressed,
then voice broadcasting can be done.
Press the button once again to stop the
Talk mode.
6 6 . SERvICE TERMINAl
This terminal is used only for service purposes.