Hyundai H-MS2300 - Manual (Page 11)

- 11 -
Text display mode (id3 display)
This unit is capable of displaying the text information (ID3 tag) of an MP3 song on the display. To
switch on or off this function, simply press STEREO/MONO/ID3 button.
Intro scan play mode
Press INTRO button, the first 10 seconds of every track from track 1 will be played in order.
USB flash drive/SD MP3 playback
This unit is equipped with a USB socket which can accept and play MP3 files stored on standard
USB flash drives (also known as “pen drives”) which are for memory storage (compatible with USB
version 1.1 and 2.0).
Also the unit has SD-CARD socket which can accept and play MP3 files stored on standard “SD”
type flash memory cards (maximum 2 GB). Insert the SD-CARD or USB flash drive in the unit.
1. To use this function press FUNCTION button repeatedly until the display shows “USB”. After
about 5-10 seconds the display will indicate the number MP3 songs, also the number of folders
on the device.
2. Press the FOLDER button repeatedly to select the desired folder number.
3. Press NEXT or BACK button to skip forwards or backwards to select the desired MP3 file in
selected folder.
4. Press PLAY/PAUSE to start playback of the selected song.
Note: All functions for USB drive and SD-CARD MP3 playback are exactly the same as in CD-MP3
mode.
If USB drive or SD-CARD are simultaneously inserted into both slots, the unit will automatically
read the USB first and allow playback of the contents of the USB as usual. In such a case, to select
the SD-CARD, press the STOP/USB/SD button to stop the playback of the USB, then press the
STOP/USB/SD button again and hold for 3 seconds to switch from USB mode to SD mode. Repeat
the previous step to switch back to the USB mode.